How To Disinfect Anything With Microfiber

Since the early stages of the current COVID-19 pandemic, we at Diamond Cleaning Service have seen an increase in concerns surrounding cleaning and disinfecting homes and workplaces. Cleaning and disinfecting are always important but, as with a lot of things, it’s not something that most of us really pay attention to until something drastic happens to bring it to the forefront of our minds. We thought we’d take this opportunity to put together information that we’ve culled from different government agencies, our own professional expertise.

First Things First…Cleaning -vs- Sanitizing -vs- Disinfecting

Most people don’t realize that there is a difference between cleaning, sanitizing, and disinfecting. Basically, cleaning removes the dirt, sanitizing lowers the bacteria and virus count, and disinfecting kills bacteria and viruses.

Cleaning removes dirt, dust, impurities, and germs from a surface reducing the bacteria and virus load. This is generally done with a detergent or soap, and water. Think about laundering clothes and textiles or washing your counters with an all-purpose cleaner and a cloth. Microfiber and water are also an effective and detergent free way to clean since microfiber is positively charged and negatively charged dirt clings to it like a magnet, thus removing it from hard surfaces. Proper cleaning removes 97% of dirt and germs from surfaces.

Sanitizing uses a chemical to remove bacteria and viruses to an acceptable level as determined by public health standards and requirements. Oftentimes, the all-purpose cleaner that you’re using in your home is also a sanitizer. Sanitizers are great for routine household cleaning in high-touch areas, like counters, tables, desks, doorknobs, light switches, etc. Sanitizing removes 99.9% of illness-causing bacteria and viruses giving you a 1,000 times reduction in potential exposure.

Disinfecting is the granddaddy of them all. Disinfecting uses chemicals to kill, not simply remove, bacteria, and viruses. This is where we want to focus our efforts and we’ll go over everything you never wanted to know about disinfecting in a bit. Disinfecting must be done after thoroughly cleaning and the disinfectant must remain on the surface for a specified period of time, usually five to ten minutes, in order to be effective. If done correctly, disinfecting kills 99.999% of illness-causing bacteria and viruses giving you a 100,000 times reduction in potential exposure.

Types Of Disinfectants - Bleach, Lysol, Acids, & More

Time to get entranced in the wonderful world of disinfecting. There are four types of disinfectants: Oxidizers, Phenolics, Quaternary Ammonium Compounds (Quats), and Acids. They’re all effective but they work in different ways and have their own pros and cons.

Oxidizers, like bleach or peroxide, are the most common household disinfectants. They’re cheap, they’re effective and honestly, if I smell bleach, I feel pretty confident that stuff is disinfected! Oxidizers work by destroying the cell walls and stealing electrons which basically pulls the cells apart. Oxidizers are an excellent disinfectant because they’re effective on a wide range of organisms. Their main downfall is that they are harmful to many surfaces and they’re unstable. Bleach is a corrosive and also stains so it’s best not to use it frequently. Also, once bleach, peroxide, and other oxidizers are exposed to oxygen, they begin to breakdown. A bottle of bleach is actually only effective as a disinfectant for a few months after opening and the shelf life for peroxide is even shorter.

Phenolics work by disrupting the cell walls by coagulating proteins and basically drying them out. Lysol is a common phenolic disinfectant. Phenol is the oldest known disinfectant and was used by Dr. Lister, the pioneer of antiseptic surgery. They’re best used in a healthcare setting because of their ability to inactivate the most difficult viruses. Phenols are toxic in high concentrations and can be harmful to people. When using phenolic disinfectants, it is imperative that the disinfected surface be rinsed after the appropriate contact time is up (more on that later).

Quats work by denaturing proteins and making them fall apart. They are preferred by professional cleaners in residential settings because they effectively destroy a wide variety of organisms without damaging surfaces. Quats lose their power on dirty surfaces so they will only be effective if they’re used after the surfaces have been thoroughly cleaned. Quats also are attracted to and become absorbed by fabrics meaning that less of the chemical is available to disinfect a hard surface because it stays on the towel that you are using to apply it. Basically, it dilutes itself by staying on the fabric. This can be compensated for by using a stronger concentration. (

Acids work by basically dissolving cells. These disinfectants, like citric acid, are found in many popular bath and kitchen household cleaners. Acids are simple and effective disinfectants. However, they also can be damaging to hard surfaces.

Disinfecting Guidelines

To disinfect properly, we’ve got to remember two key rules: clean first and contact time. If you don’t follow these very important steps, you will not be killing the bacteria and viruses that cause illness. First, let’s talk about why we can’t just use a “disinfectant cleaner” and be done with it. Despite what commercials may tell you, there’s no such thing as a disinfectant cleaner; well, not one that is going to be effective that we’re aware of. A 2-in-1 just doesn’t exist. There’s no way to get around the fact that a disinfectant is only going to truly work on a clean surface. Why do you ask? Dirt consumes disinfectant. Dirt also covers the germs that a disinfectant is meant to kill. It will act as a microscopic umbrella shielding the germs from the disinfectant. Then, the germs that were protected by the dirt will feed on it and multiply. The only way to properly disinfect is to clean first to remove the dirt and disinfect after to kill what was left behind. If you’re using your disinfectant on a dirty surface, you are simply wasting your time and chemicals.


The second facet to proper disinfection is “contact time” or “dwell time.” A lot of us make the mistake of just spraying the disinfectant and wiping it dry but we need to remember that disinfecting takes time! So, how do we do that? According to Becker Hospital Review, the best way to ensure that your disinfectant is effective is to make sure that the surface remains visibly wet with a disinfectant solution for the full recommended contact time, usually between five and ten minutes. EPA approved disinfecting agents will have the recommended contact time listed on their labels. For example, the Clorox label recommends a 5 minute contact time for their regular bleach to disinfect but a lot of solutions come with a ten-minute recommendation.



So, to disinfect a bathroom, clean the surfaces with a damp microfiber towel (different towels for each area to avoid getting toilet germs on my counter) and then take another microfiber towel and submerge it in my solution and coat the each of the surfaces, again using a different towel for each area – never put a used towel back into your solution. The surfaces would need to remain wet for five minutes (or as long as the label indicates) before being wiped away and air-dried. It is not effective to simply take a wipe and run it across your doorknobs and light switches.

For hard flat surfaces, like floors, countertops, and tables, soak your mop or cloth in the disinfectant solution and wring it out slightly, just so it’s not dripping. Apply the solution and leave it on for five minutes and then rinse with clean water and let it air dry. For more challenging surfaces, like doorknobs, cabinet, appliance or drawer handles, spray on the solution or simply wrap your treated towel around the surface to let the chemical do its job. Use a clean cloth for each surface area and do not put a soiled cloth back in your solution.

There are two key rules for proper disinfection, cleaning first, and allowing for the appropriate contact time. There’s just one more thing that needs reiteration – Read the Label! Some disinfectants need to be washed away after use. These are primarily phenolics used in healthcare but it’s really important to make sure that you’re not leaving something harmful on your surfaces in an effort to disinfect.


Another way we can protect ourselves, homes, and workplaces from germs is to make sure we’re not bringing the contagions inside, to begin with. The easiest way to do this is to wash your hands for at least the full 20 seconds as recommended! There are some great instructional videos on how to properly wash your hands here and here. Hand-washing should be done frequently, especially after coming into contact with any high-touch surface (doorknob, phone, remote control), pre- and post- food prep, entering a new space, and returning to your home or office.

Wearing gloves may seem like a great idea but if you’re wearing them on dirty hands or not removing them properly, you’re likely exacerbating the spread of contaminants. This video is a great learning tool and points out the importance of only skin touching skin and glove touching glove.

Color coding your microfiber products is key in preventing cross-contamination. Cross-contamination is the unintentional transfer of bacteria, viruses, or other pathogens from one surface to another. Aside from proper training and care, one of the simplest ways to prevent this is to only use specific colors in specific areas. For instance, you would assign a red cloth or red mop pad to be used only in bathrooms. The green cloths and pads would only be for use in the kitchen. That way, there’s not a danger of transferring germs from your bathroom sink to your kitchen cabinets. You can also specify a color specifically for disinfecting. Once you’ve used your red and green towels for cleaning your kitchen and bathroom respectively, you will use a yellow towel only for disinfecting. This is also very helpful when laundering your clothes at the end of the day. It’s important to always remember to use a clean cloth or mop for each task.

Disinfecting Your Home

Once you’ve taken your steps to clean your home or office, it’s time to disinfect. The importance of focusing on high touch areas and easy transition paths that can spread disease. One easy transition path that is overlooked is actually disinfecting your tools, like vacuum tools, brushes, and dusters. Also, make sure that you are using chemicals appropriate for the surfaces you’re cleaning. Do not overuse chemicals. Using too much of chemicals does not make them any more effective, can be a waste of resources, and potentially harm your surfaces or you.

In your home, you’ll want to focus on four main areas: kitchen, bathrooms, living areas, and bedrooms. The kitchen is probably the most used area in any home. After proper cleaning, the high touch surfaces that you’ll concentrate your disinfecting on are drawer and cabinet pulls, appliance (refrigerator, microwave, dishwasher, oven) handles, push buttons on your appliances, faucets, and countertops. Wipe down light and garbage disposal switches and garbage and recycling can lids. Also, pay attention to the kitchen tables as chairs, especially armrests. For kitchen surfaces, a recommendation is Purell Foodservice Surface Sanitizer. This particular product has a short 30 second dwell time and does not need to be rinsed. Read the label instructions for concentration and dwell time for whichever disinfectant product you choose.


In the bathrooms, after proper cleaning, prepare a disinfecting solution and wipe down all of the frequently touched surfaces like faucets, drawer and cabinet pulls, light switches, appliances (hairdryers and irons), countertops and grab bars. Lemocide from Total Solutions. Diamond Cleaning Service recommends Comet Disinfectant Bathroom Cleaner as an option. Shower curtains and bath mats and rugs should also be disinfected. This can be achieved in the washing machine with high heat and bleach (if safe for the fabric) or other laundry disinfectants.


For your living areas like family rooms, living rooms, hallways, and other high trafficked spaces focus disinfecting on tables, chairs, sofas, and the pushbuttons of TVs, remote controls, lamps, switches, door handles and frames, railings and banisters. For porous surfaces like curtains, seat cushions, fabric sofas, and chairs, Diamond Cleaning Service recommends Lysol Disinfectant Spray. If you’re trying a new disinfectant and are not sure if it’s safe for a surface after reading the label, test it in an inconspicuous area.


Once bedrooms have been dusted, vacuumed and the linens washed and changed, use your disinfectant to wipe down all surfaces, including dressers, night tables, light switches, drawer and cabinet pulls, doorknobs, and remote controls. To effectively clean electronics like remote controls, it’s best to spray your cloth with disinfectant and blot the control or other electronics onto the cloth instead of spraying directly onto the electronics.

ARCSI Logo.jpg

©2019 - 2021 Diamond Cleaning Service, LLP. All Rights Reserved.

Privacy Policy & Legal